Self-aliging Ball Bearing 2300 Series 

      This type of ball bearing is recommended when alignment of the shaft and housing is difficult and the shaft may flex. The outer ring has a spherical raceway and its center of curvature coincides with that of the bearing; therefore, the axis of the inner ring, balls and cage can deflect to some extent around the bearing center. Pressed steel cages are usually used. Since the contact angle is small, the axial load capacity is low. The permissible dynamic misalignment is approximately 0.07 to 0.12 radian (4 to 7 degrees) under normal loads. RunFine self-aligning ball bearings 2300 Series undergo highly advanced manufacturing processes that enable it to consistently maintain precise contour raceway measurement. Our newly sourced raw materials have significantly improved gliding motion at the point of contact between the bearing's diameter and slinger.  Furthermore, load-carrying capacity has increased by 30% and lifespan is now thr…